| Phone |
| |
| |
| 대표전화 |
1577-7956 |
| 본 사 |
031-457-9187 |
| 대 전 |
042-932-1265 |
| |
|
| Web Site Visitors |
| |
| |
| Today |
224 |
| Yesterday |
1062 |
| Since 2006 |
2,610,895 |
| |
|
|
|
| ■ |
OmniaTap II Water Purification System for ASTM Type II |
|
| The ideal system when pure water is required in small amounts |
 | |
| OmniaTap II Purewater System for ASTM Type II | |
| |
 | |
|
|
| Cat. No. |
| |
| 18200214, OmniaTap II 6 ASTM Type II |
견적요청 |
| |
| 18200217, OmniaTap II 12 ASTM Type II |
견적요청 |
| |
| 18200220, OmniaTap II 20 ASTM Type II |
견적요청 |
| |
| 18200215, OmniaTap II 6 UV ASTM Type II |
견적요청 |
| |
| 18200218, OmniaTap II 12 UV ASTM Type II |
견적요청 |
| |
| 18200221, OmniaTap II 20 UV ASTM Type II |
견적요청 |
| |
| ▪ |
ASTM 에서 규정한 Type II Pure water 조건을 엄격하게 준수하는 순수제조장치 :
- Conductivity at 25 °C [μS/cm] : 0.1 up to 1
- Resistance at 25 °C [MΩ x cm] : 10 up to 1
- TOC Value [ppb] : <30
- Silicate Removal [%] : <99 |
|
| ▪ |
수돗물에 직접 연결하여 사용 |
|
| ▪ |
연결되는 수돗물은 다음과 같은 조건을 갖추어야 합니다. |
|
- Feedwater pressure [bar] : 1 up to 6
- Conductivity at 25 °C [μS/cm] : < 2000
- Colloid index SDI : < 5
- TOC [ppm] < 2 등등 |
|
| ▪ |
Pure Water Performance at 15 °C [l/h]
- OmniaPure II 6 : 시간당 6리터 생산
- OmniaPure II 12 : 시간당 12리터 생산
- OmniaPure II 20 : 시간당 20리터 생산 |
|
| ▪ |
Tank 용량
- 16500010, 10 리터 Tank : 장비에 기본 장착된 Docking Tank
- 16500031, 30 리터 Tank: 30리터 저장 탱크 (option)
- 16500061, 60 리터 Tank : 60리터 저장 탱크 (option) |
|
| ▪ |
Buffer 와 Media 준비에 사용되는 순수 제조장치 |
|
| ▪ |
254nm UV 를 장착하여 Water Disinfection |
|
| ▪ |
누수 감지 센서가 기본으로 장착되어 장치내에 누수현상 감지 |
|
| ▪ |
Dispensing performance [l/min.] : 최대 채수속도는 분당 2리터이고 속도는 조절 가능 |
|
| ▪ |
한번에 뽑을 수 있는 Pure Water Volume : 0.05 up to 25 리터 |
|
| ▪ |
버퍼용액, 미생물 배지준비, 일반적 화학반응 및 정성테스트,
Autoclave, 초음파세척기, 항온항습조, CO₂ Incubator 그리고
초순수 (Ultrapure water) 제조장치의 공급수 (Feedwater) 등의 목적으로 사용 |
|
| ▪ |
이 Dispenser 상세 특징은 ☞ OptiFilltouch Dispenser
링크 클릭 |
|
|
| Flow Chart OmniaTap II UV |
|
 | |
|
| Specifications |
OmniaTap II 6 / 6 UV |
OmniaTap II 12 / 12 UV |
OmniaTap II 20 / 20 UV |
|
| Pure water values type II |
|
|
| Pure water performance at 15 °C [l/h] |
6 |
12 |
20 |
|
| Conductivity* [μS/cm] |
0.1 up to 1 |
0.1 up to 1 |
0.1 up to 1 |
|
| Resistance* [MΩ x cm]
| 10 up to 1 |
10 up to 1 |
10 up to 1 |
|
| TOC value* [ppb]
| < 30 |
< 30 |
< 30 |
|
| Silicate removal* [%]
| > 99 |
> 99 |
> 99 |
|
| Dispensing performance [l/min.]
| up to 2 |
up to 2 |
up to 2 |
|
| Individually adjustable dispensing volume [liters]
| 0.05 up to 25 |
0.05 up to 25 |
0.05 up to 25 |
|
| Particles** > 0.2 μm [1/ml]
| < 1 |
< 1 |
< 1 |
|
| Bacteria** [CFU/ml]
| < 0.01 |
< 0.01 |
< 0.01 |
|
| Pressure outlet pure water tank
| 100 l/h - 2 bar |
100 l/h - 2 bar |
100 l/h - 2 bar |
|
| UV desinfection 254 nm
| - / yes |
- / yes |
- / yes |
|
* The values given are typical and may vary depending on the quality of the feed water
** With sterile filter capsule 0.2 μm
|
|
| Feedwater requirements |
|
|
| Tap water according to DIN 2000 |
|
| Feedwater pressure [bar] |
1 up to 6 |
1 up to 6 |
1 up to 6 |
|
| Conductivity at 25 °C [μS/cm] |
< 2000* |
< 2000* |
< 2000* |
|
| Colloid index SDI |
< 5** |
< 5** |
< 5** |
|
| Dissolved CO₂ [ppm] |
< 30 |
< 30 |
< 30 |
|
| Free chlorine [ppm] |
< 0.1 |
< 0.1 |
< 0.1 |
|
| TOC [ppb] |
< 2 |
< 2 |
< 2 |
|
| Hardness [as CaCO3] [ppm] |
< 300 |
< 300 |
< 300 |
|
| Iron/manganese [mg/l] |
< 0.05 |
< 0.05 |
< 0.05 |
|
| Silica [ppm] |
< 30 |
< 30 |
< 30 |
|
| pH range |
4 up to 10 |
4 up to 10 |
4 up to 10 |
|
* Feed water with high conductivity can reduce the service life of the cartridges and increase the conductivity of type III water.
If the conductivity is between 800 and 2000 μS/cm, we recommend using a water softener
** With an SDI/FI between 3 and 5, pre-treatment must be used |
|
| Technical data |
|
|
| Feedwater connection |
R3/4 inch |
R3/4 inch |
R3/4 inch |
|
| Electrical connection [Volt/Hz] |
90 - 240/50 - 60 |
90 - 240/50 - 60 |
90 - 240/50 - 60 |
|
| Connected load [W] |
0.1 |
0.1 |
0.1 |
|
| Ambient temperature [°C] |
4 up to 40 (Recommendation: 10 up to 25) |
|
| Dimensions without tank* [WxHxD mm] |
390 x 720 x 525 |
390 x 720 x 525 |
390 x 720 x 525 |
|
| Dimensions with 10 L docking tank* [WxHxD mm] |
390 x 720 x 615 |
390 x 720 x 615 |
390 x 720 x 615 |
|
| Weight without 10-L docking tank [kg] |
17 |
18 |
18 |
|
| Weight with 10-L docking tank [kg] |
20 |
21 |
22 |
|
| * With OptiFill Dispenser |
 | |
|
